 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SL03 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 thru SL24 TVSarrayTM Series TM DESCRIPTION (300 watt) This 3 pin ULTRA LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4. This product provides unidirectional protection for 1 line by connecting the Input/Output line to pin 1, pin 2 to common or ground and pin 3 (is not connected). The SL03 thru SL24 product provides board level protection from static electricity and other induced-voltage surges that can damage sensitive circuitry. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays protect 3.0/3.3 Volt components such as DRAM's, SRAM's, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 Volts. Because of the physical size, weight and protection capabilities, this product is ideal for use in but not limited to miniaturized electronic equipment such as hand held instruments, computers, computer peripherals and cell phones. FEATURES * * * * Protects 3.0/3.3 up through 24V Components Protects 1 Unidirectional line Provides electrically isolated protection SOT-23 Packaging PACKAGING * * * Tape & Reel EIA Standard 481 7 inch reel 5,000 pieces 13 inch reel 10,000 pieces MAXIMUM RATINGS * * * * Operating Temperatures: -55C to +150C Storage Temperature: -55C to +150C SL03 thru SL24 have a Peak Pulse Power: 300 Watts (8/20 sec, Figure 1) Pulse Repetition Rate: <.01% MECHANICAL * * * Molded SOT-23 Surface Mount Weight: .014 grams (approximate) Body Marked with device number ELECTRICAL CHARACTERISTICS @ 25 C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS MAX SL03 SL05 SL12 SL15 SL24 L03 L05 L12 L15 L24 3.3 5.0 12.0 15.0 24.0 BREAKDOWN VOLTAGE VBR @1 mA VOLTS MIN 4 6.0 13.3 16.7 26.7 CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS MAX 8 10.8 19 25 44 CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS MAX 11 13 26 32 57 LEAKAGE CURRENT ID @ VWM A MAX 200 100 1 1 1 CAPACITANCE @0V, 1 MHz C pF MAX 3 3 3 3 3 TEMPERATURE COEFFICIENT OF VBR aVBR mV/C MAX -5 3 10 13 30 PART NUMBER DEVICE MARKING NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. MSC1377.PDF ISO 9001 CERTIFIED REV C 1/27/2000 SL03 thru SL24 WAVE FORMS PPP - PEAK PULSE POWER 100 Ipp -- Peak Pulse Current -- % Ipp 100 Peak Value -- Ipp 8 X 20 Waveform 10 8/20 s 300 W pulse 50 Half-Value -- Ipp 2 1.0 0 0 t 10 td 20 30 .10 100ns 1s 10s 100s 1ms td - PULSE TIME - SEC 10ms t -- Time in microsec FIGURE 1 Peak Pulse Power Vs Pulse Time FIGURE 2 Pulse Wave Form MOUNTING PAD SOT23 CIRCUIT DIAGRAM PACKAGE OUTLINE MSC1377.PDF ISO 9001 CERTIFIED REV C 1/27/2000 |
Price & Availability of SL03
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |